Speed limit sticker 90 km/h (20 cm)

A 20 cm diameter sticker indicating the maximum speed limit, made from Class 1 retro-reflective film in accordance with ČSN EN 12899-1, complying with the current version of Decree No. 153/2023 Coll., Annex 7, Part G.

It is printed on high-quality material using inks with high resistance to abrasion and UV radiation.

We guarantee compliance with technical and legal regulations, in particular Government Decree No. 375/2017 Coll., ČSN ISO 3864-1, ČSN ISO 3864-2, ČSN ISO 3864-3 and ČSN ISO 3864-4.

G) Technical requirements for the marking of the maximum authorised speed on vehicles

1. Vehicles of categories M2, M3, N2, N3, O, R, S, C, T and Z, with the exception of front-engine vehicles of category SN and single-axle tractors with trailers and special carriers for working attachments, must be fitted at the rear of the bodywork, where the vehicle’s design permits, on the left-hand side, with a marking of the maximum permitted speed rounded

a) for vehicles with a design speed not exceeding 45 km/h to the nearest lower whole number,

b) for other vehicles to the nearest lower integer divisible by five.

2. The maximum permitted speed marking shall be in the form of a white circle edged in red with an outer diameter of 200 mm; letters within the circle, where used, must have a height of 35 mm for ‘k’, 24 mm for ‘m’, and 75 to 80 mm for numerals; the stroke width of letters is 6 mm and that of numerals is 12 mm. The colour of the lettering is black. The maximum speed limit sign must always be legible and must not be obscured during operation. The marking must be made of Class 1 retro-reflective material in accordance with ČSN EN 12899-1, i.e. red and white; letters and numbers must be non-reflective. Retro-reflective material is not required for vehicles prohibited from operating in conditions of reduced visibility, special vehicles and mounted machinery.