Protective trunk edge trim Škoda Octavia III. 2013-2017 (combi, matte)

The protective strip for the rear bumper of the Škoda Octavia III is made of stainless steel. The strip is resistant to all weather conditions and moisture. It reliably protects the bumper from scratches when loading and unloading items from the boot.

The protective strip is fitted using double-sided adhesive tape, which is included in the pack. By using the protective strip, you protect the edges of the car’s bumper, thereby avoiding potential repair costs. 

Alufrost is a manufacturer of steel protective strips for the automotive industry. Thanks to its long-standing tradition of manufacturing and the quality of its products, the Alufrost brand is renowned throughout Europe.

1) Clean and degrease the area where the protective strip will be applied.

2) Before gluing, first place the protective strip where you intend to stick it.

3) Mark the outer edges of the protective strip on the bumper using a marker pen or masking tape.

4) Remove the protective layer from the self-adhesive strip on the protective strip.

5) Position it according to the marks you made in step 2).

6) Press the strip down firmly across its entire surface.

CAUTION: Once the strip is stuck down, it cannot be removed. Please pay particular attention to points 2) and 5) during installation.