Philips Master TL-D 18W-840 G13 Super 80 Secura
Gibanje cene
LOKACIJE TRGOVIN
Cap-Base G13 [Medium Bi-Pin Fluorescent]Bulb T8 [26 mm]Life to 10% failures EM 12000 hrLife to 10% fail Preheat EL,3h 17000 hrLife to 10% fail Nonpreh...
Preberi cel opis
29,90 €
+ stroški dostave
Ponudba trgovine Lumories.si za izdelek Philips Master TL-D 18W-840 G13 Super 80 Secura. Pravilnost cene in podatkov preveri na spletni strani trgovine.
Barva
Cuin
Ceneje.si Unique Identification Number
CX00530C17
Prijavi napako
PODOBNI IZDELKI
Cap-Base G13 [Medium Bi-Pin Fluorescent]
Bulb T8 [26 mm]
Life to 10% failures EM 12000 hr
Life to 10% fail Preheat EL,3h 17000 hr
Life to 10% fail Nonpreh EL,3h 10000 hr
Life to 50% failures EM 15000 hr
Life to 50% fail Preheat EL,3h 20000 hr
Color Code 840 [CCT of 4000K]
Color Rendering Index 85 Ra8
Color Designation (text) Cool White
Color Temperature 4000 K
Luminous Flux EM 25°C, Rated 1300 Lm
Luminous Flux EM 25°C, Nominal 1300 Lm
Lum Efficacy Rated EM 25°C 72 Lm/W
LLMF EM 2000h Rated 96 %
LLMF EM 4000h Rated 95 %
LLMF EM 6000h Rated 94 %
Design Temperature 25 C
Chromaticity Coordinate X 383 -
Chromaticity Coordinate Y 386 -
Lamp Wattage 18W
Lamp Wattage EM 25°C, Nominal 18W
Lamp Wattage EM 25°C, Rated 18.0W
Lamp Voltage EM 25°C 59V
Lamp Current EM 25°C 0.360 A
Dimmable Yes
Energy Efficiency Label (EEL) A
Mercury (Hg) Content 2.0 mg
Energy consumption kWh/1000h 22 kWh
Erythemal Radiation
Erythemal Radiation >320nm 4 mW
Damage Factor D/fc 0.13 -
Base Face to Base Face A 589.8 (max) mm
Insertion Length B 594.5 (min), 596.9 (max) mm
Overall Length C 604 (max) mm
Diameter D 28 (max) mm
-Special protective coating around the lamp, prevents products from contamination in case of accidental lamp breakage; easily recognized in audit situations by two blue rings at one end
-Protects products from discoloring and loss of taste by 90 % lower UV-emission
-Makes luminaires compliant with relevant standards in the industry, such as HACCP, ISO 22000 and IEC 61549: Fragment Retention Lamp Standard
Features
-Protective coating (Surlyn) around the lamp, indicated by two blue rings at one lamp end. This lamp is NOT meant for application in closed luminaires
-Fully compliant with IEC 61549 - Fragment Retention Lamp Standard and with relevant standards in the food industry, such as HACCP and ISO 22000
-No degradation under influence of temperature or UV
-Coating blocks 90 % of UV emission of the lamp
-Fully recyclable, including the protective lamp coating
-Relatively high efficacy, both initially and during lamp lifetime, with high lumen maintenance
Applications
-For use where contamination resulting from lamp breakage must be prevented, e.g. in food preparation, health care, pharmaceuticals, cleanrooms etc.
-Suitable for use in environments with increased risk of breakage, e.g. sports halls
-Suitable for use in environments where UV emission should be reduced (museums, libraries, archives, food industry, fashion shops, etc.)














