Dimmable No
ECG reset time > 0.5 s
Overtemperature protection automatic switch off, reversible by mains reset
Restriction on ignition time 18 min
Approval marks ? approval VDE | VDE-EMC | ENEC 10
Standards acc. to EN 61347-2-12 | acc. to EN 55015:2006 + A1:2007 | acc. to EN 61000-3-2 | acc. to EN 61547
Type of protection IP20
Design / version Built-in unit
Product weight 230 g
Relative humidity 5?85 %
Temperature range at storage -40?85 ?C
Inrush current 40 A
Rated power factor ? 0.95
Maximum mains current 0.35 A
Nominal voltage 220-240V
Mains frequency 50-60 Hz
DC voltage -
Lamp wattage 73W
Operating frequency 0.165 kHz
Ignition voltage 4.5 kVp
Device power loss 6.5W
Max. no. of ECGs on circuit breaker 10 A 7
Max. no. of ECGs on circuit breaker 16 A 13
Maximum cable capacity ECG/lamp 120 pF
TH full width at half maximum 250 ?s
Type of current AC
Cable cross-section, input side 0.5?2.5 mm?
Cable cross-section, output side 0.5?2.5 mm?
Maximum cable length ? system 1.5 m
Length 110.00 mm
Width 75.00 mm
Height 30.00 mm
Mounting hole spacing, length 99 mm
Mounting hole spacing, width 64 mm
Wire preparation length, input side 10?11 mm
Wire preparation length, output side 10?11 mm
Ambient temperature range -25?+55 ?C
Operating temperature 80 ?C
Max. housing temperature in case of faul 110 ?C
PTi S ? the high-class built-in ECG
-Compact dimensions and low weight for small luminaire designs
-Long reliable life at maximum permitted temperatures
-Excellent thermal behavior for very high limit temperatures tc and ta
-High-quality metal casing for optimum thermal link between the ECG and the luminaire
General
-Supply voltage: 220 V?10 %/240 V+10 %
-Line frequency: 50 - 60 Hz
-Not suitable for dc operation
-RI suppression: to EN 55015 (A1: 2007) up to 300 MHz
-Safety: to EN 61347-2-12
-Line harmonics: to EN 61000-3-2
-Immunity: to EN 61547
-Luminous flux factor 1 compared with CCG operation
-Instant hot restart not possible
-VDE Sign EMV Sign ENEC 10
