OSRAM štarter PTI 70/220-240 I
Gibanje cene
LOKACIJE TRGOVIN
Cable types, input side H03VV-F 2x0.75 mm? | H03VV-F 2x1.5 mm? | H03VV-F 2x2.5 mm? | H03VV-F 3x1.5 mm? | H03VV-F 3x2.5 mm? | H05VV-F 2x0.75 mm? | H05VV-F 2x1.5 mm? | ...
Preberi cel opis
55,90 €
+ stroški dostave
Ponudba trgovine Lumories.si za izdelek OSRAM štarter PTI 70/220-240 I. Pravilnost cene in podatkov preveri na spletni strani trgovine.
Pomembna informacija
Proizvajalec
Vrsta
Cuin
Ceneje.si Unique Identification Number
CX00239CCC
Prijavi napako
PODOBNI IZDELKI
Cable types, input side H03VV-F 2x0.75 mm? | H03VV-F 2x1.5 mm? | H03VV-F 2x2.5 mm? | H03VV-F 3x1.5 mm? | H03VV-F 3x2.5 mm? | H05VV-F 2x0.75 mm? | H05VV-F 2x1.5 mm? | H05VV-F 3x0.75 mm?
Dimmable No
ECG reset time > 0.5 s
Overtemperature protection automatic switch off, reversible by mains reset
Restriction on ignition time 20 min
Approval marks ? approval VDE | VDE-EMC | ENEC 10
Standards acc. to EN 61347-2-12 | acc. to EN 55015:2006 + A1:2007 | acc. to EN 61000-3-2 | acc. to EN 61547
Type of protection IP20
Design / version With cable clamp
Product weight 275 g
Relative humidity 5?85 %
Temperature range at storage -40?85 ?C
Inrush current 40 A
Rated power factor ? 0.95
Maximum mains current 0.35 A
Nominal voltage 220-240V
Mains frequency 50-60 Hz
DC voltage -
Lamp wattage 73W
Operating frequency 0.165 kHz
Ignition voltage 4.5 kVp
Device power loss 6.5W
Max. no. of ECGs on circuit breaker 10 A 7
Max. no. of ECGs on circuit breaker 16 A 13
Maximum cable capacity ECG/lamp 120 pF
TH full width at half maximum 250 ?s
Type of current AC
Cable cross-section, input side 0.75?2.5 mm?
Cable cross-section, output side 0.75?2.5 mm?
Maximum cable length ? system 1.5 m
Length 155.00 mm
Width 83.00 mm
Height 32.00 mm
Mounting hole spacing, length 163 mm
Wire preparation length, input side 10?11 mm
Ambient temperature range -25?+50 ?C
Operating temperature 75 ?C
Max. housing temperature in case of faul 110 ?C
POWERTRONIC INTELLIGENT PTi I and SNAP for HID lamps ? with strain relief
PTi I ? highly practical with strain relief
-Extended terminal section enables mains looping
-Screw-down cable clamps for reliable strain relief
-Screwless plug-in terminals for rapid and precise cabling
-Split cable clamps for easier advance cabling work with tried and trusted cable connection systems
-Small casing dimensions make the units suitable also for small ceiling openings
PTi SNAP ? optimum convenience for remote installation
-Integrated socket/plug offers many benefits
-Rapid error-free installation of the power and luminaire connections
-Incorrect wiring virtually impossible thanks to coded plug/socket
-Simple primary-side looping
-Based on the established ST 18/GST 18 plug system
-Equipped with ST 18 universal socket on the luminaire side for a large number of existing ST 18 solutions
-Equipped with a GST 18 connector on the primary side for the power supply
-Casing lock for correct strain relief for the cables
-Excellent thermal properties and long reliable life at maximum permitted temperatures
