With cable clamp, for professional applicationsDimmer trailing or leading edge phase control Dimming range 0…100 % Dimmable Yes Overload protection automatic reversible Overtemperature protection automatic reversible Short-circuit protection automatic reversible Type of fixing screw-mounting SEG number 5280332 Approval marks – approval VDE | VDE-EMC | ENEC 10 Protection against ignition and fire F, MM Standards acc. to EN 55015:2006 + A1:2007 | acc. to EN 61000-3-2 | acc. to EN 61547 | acc. to EN 61047 | acc. to EN 61347 IP code IP20 Design / version long with cable clamp New article NEW Product weight 225 g Relative humidity 5…85 % 1) Temperature range at storage -40…85 °C Color of the product grey Inrush current 1.5 A Power factor ? > 0.95 Maximum mains current 0.9 A 2) Nominal voltage 230-240 V Mains frequency 50-60 Hz DC voltage 176…275 V Lamp wattage 50...225 W Operating frequency 50 kHz 3) Output voltage 11.6 V (225 W) | 11.7 V (50 W) Device power loss 9.0 W 4) Max. no. of ECGs on circuit breaker 10 A 11 Max. no. of ECGs on circuit breaker 16 A 18 Maximum cable length – system 2 m Length 170 mm Width 44 mm Height 34 mm Mounting hole spacing, length 140 mm Wire preparation length, input side cable sheath 14 mm, wire 8 mm Wire preparation length, output side cable sheath 14 mm, wire 8 mm Ambient temperature range -20…+50 °C Operating temperature 85 °C Max. casing temp. in case of fault 110 °C General-Suitable for emergency installations-Line frequency: 0, 50–60 Hz-Short-circuit protection, overload protection, overtemperature protection: electronically reversible-RI suppression: to EN 55015 (A1: 2007)-Line harmonics: to EN 61000-3-2-Safety: to EN 61347-Immunity: to EN 61547-VDE Sign EMV Sign ENEC 10 Sign
