VR Carbon Hubcap Set - 15"

The set includes 4 wheel covers. They fit most 15" steel rims. The wheel covers come in a handy paper box, in which you can store them safely when not in use.

The surface of the wheel covers is treated with a durable, non-peeling varnish, ensuring a stylish look and easy cleaning.

The holes in the hubcaps are designed to allow for effective cooling of the wheel rims whilst driving. Each hubcap also features a cut-out, making the valve easily accessible.

The product complies with the type approved by the Czech Ministry of Transport No. 1047, ref. no.: 204333/93-222

Czech installation instructions are included with every set of hubcaps.

Fitting the wheel caps is simple and requires no tools. The clips on the caps ‘click’ into place on the wheel rims. A thick steel wire on the outside of the caps presses the clips against the rims, securing the caps so they cannot fall off (see Figure 2 in the photo gallery).

It may happen that the hubcap is too loose or too tight on the wheel rim. In this case, you need to reduce or increase the diameter of the pressure spring at the bend for the valve. The spring needs to be stretched or compressed here (see image 3 in the photo gallery).