Je izdelek predrag? Nastavi opomnik za ceno in obvestimo te, ko pade!
LOKACIJE TRGOVIN
This versatile studio performer may be used with confidence in a wide variety of professional miking applications. Featuring direct-coupled balanced outputs for clean sig...
Preberi cel opis
Ponudba trgovine eSvet za izdelek Hyper-kardioidni kondenzatorski instrumentalni mikrofon Audio-Technica AT4053b - AUDIO-TECHNICA. Pravilnost cene in podatkov preveri na spletni strani trgovine.
Ti podatki so zbrani z uradnih strani izdelkov. Preden nadaljujete do končnega nakupa, preverite podrobnosti. Če opazite težavo, jo lahko sporočite tukaj.
This versatile studio performer may be used with confidence in a wide variety of professional miking applications. Featuring direct-coupled balanced outputs for clean signals in high-output conditions, the microphone is totally free of the distortion associated with conventional transformer-coupled outputs. And its fast response to transients contributes to the open, transparent reproduction of even the most difficult-to-capture instruments. The microphone is fully RoHS-compliant – free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS).The AT4053b consists of two modular subassemblies: an AT4900b-48 body and an AT4053b-EL hypercardioid head capsule (both available separately). Additional interchangeable capsules are available in omnidirectional (AT4049b-EL) and cardioid (AT4051b-EL). Specially engineered to meet the most critical acoustic requirements of professional recording, broadcast and sound reinforcement Hypercardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source Direct-coupled, balanced output results in a clean signal even under high-output conditions Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients Switchable 80 Hz hi-pass filter and 10 dB pad Rugged turned-brass microphone housing for enduring dependability State-of-the-art design and manufacturing techniques ensure compliance with A-T’s stringent consistency and reliability standards RoHS-compliant – free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS)ELEMENTExternally polarized (DC bias) capacitorPOLAR PATTERNHypercardioidFREQUENCY RESPONSE20-20,000 HzLOW FREQUENCY ROLL-OFF80 Hz, 12 dB/octaveOPEN CIRCUIT SENSITIVITY-34 dB (19.9 mV) re 1V at 1 PaIMPEDANCE50 ohmsMAXIMUM INPUT SOUND LEVEL145 dB SPL, 1 kHz at 1% T.H.D.155 dB SPL, with 10 dB pad (nominal)NOISE16 dB SPLDYNAMIC RANGE (typical)129 dB, 1 kHz at Max SPLSIGNAL-TO-NOISE RATIO78 dB, 1 kHz at 1 PaPHANTOM POWER REQUIREMENTS48V DC, 4.8 mA typicalSWITCHFlat, roll-off 10 dB pad (nominal)WEIGHT127 g (4.5 oz)DIMENSIONS155.0 mm (6.10") long,21.0 mm (0.83") maximum body diameterOUTPUT CONNECTORIntegral 3-pin XLRM-typeOPTIONAL INTERCHANGEABLE ELEMENTSAT4049b-EL (omnidirectional)AT4051b-EL (cardioid)ACCESSORIES FURNISHEDAT8405a stand clamp for 5/8"-27 threaded stands windscreen protective carrying caseAUDIO-TECHNICA CASE STYLES1
