GlaciAid MG-400 MK2 V4

The GlaciAid MG-400 MK2 V4 special extinguishing spray is truly versatile and high-performance thanks to its special extinguishing agent - ABF premix with additives. The spray differs fundamentally in properties and effect from standard extinguishing sprays with only water and foaming agent. It is designed for the safe elimination of virtually all types of incipient fires in homes, kitchens, workshops and vehicles. Unlike powder fire extinguishing agents, GlaciAid does not cause significant secondary damage, only light soiling at the point of application. In addition, the Mark 2 version is effective in extinguishing lithium-ion batteries and accumulators, while retaining all the extinguishing capabilities and exceptional features of the first generation. The extinguishing agent used prevents the re-ignition of combustibles after application, which is an advantage especially for lay users.

The spray is designed and manufactured in the Czech Republic using components from the EU.

It is capable of extinguishing the following combustibles:

Class A - Solid combustibles (home furnishings, paper, rubber, plastics, textiles...)
Class B - Liquid combustibles (petrol, diesel, kerosene, thinners, paints, to a lesser extent polar combustibles...)
Class C - Gas appliances up to 3 bar operating pressure (stoves, cookers...)
Class F - Flammable fats and oils (fryers, grills, ovens, microwave ovens...)
Class E - Common electrical appliances up to an operating voltage of 400V from a distance of 1 metre
Li - Lithium ion batteries and batteries up to 250 Wh

The aerosol stream of extinguishing agent enhances the performance itself - the extinguishing agent is applied as a fine foam aerosol with optimum distribution volume. Thanks to the BOV technology (extinguishing agent pouch inside the container), the spray can be used in all positions (even bottom up), which you will appreciate e.g. when extinguishing in hard-to-reach places.

Technical information:

Fuel: premix ABF with additives.
Content of extinguishing agent: 400 ml / 440 g.
The extinguishing agent is biodegradable with minimal environmental impact, compliant with EN PFOS and PFOA standards.
Weight of complete package with cap and nozzle: 105 g.
Spray distance: 2 m.
Activity time: 11 s.
Operating temperatures: -15°C to +50°C.
Discharge gas: air 9 bar at 20°C.
Service life 2 years legal warranty + 4 years full functionality. However, due to the technology used, the spray should still be functional after 10 years.
Date of manufacture and batch: see bottom of container.
Shape of the extinguishing stream: aerosol, in the form of a moderately expanding cone, distribution approx. 36ml/sec.
Spray does not cause unnecessary secondary damage to unaffected areas.
Extinguishes fire classes A, B, C up to 3 Bar, E up to 400V, F and Li-ion battery up to 250 Wh.
Functional in any position.
Ability to interrupt extinguishing by releasing pressure on the nozzle.
Made in the Czech Republic using components from the EU.
The spray can be downloaded safety data sheet in Czech, safety data sheet in Slovak and safety data sheet in English.

Using the GLACI-AID MG-400 fire extinguishing spray:

Remove the nozzle cap. Squeeze the nozzle and direct the extinguishing agent stream into the fire from a minimum distance of 1 metre. By releasing the nozzle, extinguishing can be interrupted at any time until the extinguishing agent is exhausted. The extinguishing spray can be used in all positions.

In the vehicle, we recommend placing the spray within easy reach of the driver, ideally in the passenger compartment. Do not place the spray on open surfaces or in direct sunlight.

TIP: After a short use, the remaining extinguishing agent content can be determined by simply reweighing the spray (weight of the container with the nozzle is 105 g, weight of the new spray is 440 g / 400 ml).