Suitable f. fixtures with prot. class class I and class II Dimmable No SEG number 7980016 Approval marks – approval ENEC 10 | VDE | VDE-EMC EEI – Energy Label A2 Standards acc. to EN 61347-2-3 | acc. to EN 60929 | acc. to EN 55015:2006 + A1:2007 | acc. to EN 61000-3-2 | acc. to EN 61547 Type of protection IP20 Design / version ECG standard Product weight 285 g Relative humidity 5…85 % Temperature range at storage -40…85 °C Inrush current 20 A Nominal voltage 230-240V Mains frequency 50-60 Hz DC voltage 154…276V Operating frequency 40…50 kHz Dielectric strength 300V | 320V | 350V Max. no. of ECGs on circuit breaker 10 A 17 TH full width at half maximum 210 µs Length 360.00 mm Width 30.00 mm Height 30.00 mm Mounting hole spacing, length 350 mm Rated starting time warm start within 2 s Ambient temperature range -25…+55 °C Operating temperature 75 °C Max.housing temperature in case of fault 110 °C General-Supply voltage: 230 - 240 V-Line frequency: 0, 50 - 60 Hz-Line voltage: 198 - 264 V-Suitable for use in emergency lighting systems as per EN 50172/DIN VDE 0108-100-Same luminous flux with direct and alternating current-The battery voltage may drop to 154 V. Ignition must take place above 198 V-Lamp start: Start within 2 s with optimum filament preheating. If there is a temporary interruption in the power supply (
